DD search coil · Minelab Explorer, E-Trac, Safari series

NEL Thunder for Minelab Explorer SE, Explorer XS, Explorer II, E-Trac, Safari

Name: NEL Thunder for Minelab Explorer SE, Explorer XS, Explorer II, E-Trac, Safari
Brand: NEL
SKU: NELTH138

Article: NELTH138EAN: 4820165741688

Detection depth8.5/10

Separation of iron from non-ferrous metals (silver, bronze, gold, copper)9/10

Sensitivity to small targets8.5/10

Sensitivity to large targets8/10

Size: 14.5" × 10.5"36.8 × 26.7 cm
Weight: 20.1 oz570 g
Coil type: DD
Waterproof: 100%

NEL Thunder 14.5 x 10.5 inch DD search coil on a metal detector stem

Overview

A coil that combines high detection depth with strong metal separation.

With a slow sweep it responds very well to large and medium targets, as well as small ones — under 1 g. A strong choice for coins, hoards and relics on historical battlefields and anywhere else.

+20–42% depth+32–65% ground coveragevs. stock coil (depending on the metal detector model)

Compatible Minelab metal detectors

Explorer SE
Explorer XS
Explorer II
E-Trac
Safari

Important for Minelab Explorer

How do I fit a NEL coil to a Minelab Explorer?

The NEL coil cable is thick and well insulated, so it is a little harder to pull through the lower shaft.

Gently pull the cable through the lower shaft using a piece of string.
Do not stretch the coiled section of the cable below the connector: this damage is not covered by the warranty.
Join the lower shaft to the middle shaft.
Connect the coil to the detector.
Join the middle shaft to the upper shaft behind the control box.

Because of the cable thickness, the detector will not fold down small enough to fit in the bag supplied with it.

All FAQ and Tips →

Where it works best: Historical battlefields, old settlements and fields with mixed ground, where valuable targets lie next to iron. The elliptical shape gives good target separation and the size gives good detection depth, so you can work trashy spots without switching coils.
Recommended for: Experienced detectorists.

Features

The coil is fully waterproof and submersible. The body is filled with epoxy resin and finished with a black marine-grade coating, the kind used on yachts and boats, so it can be used without a plastic coil cover. It handles medium and high ground mineralization well.

Cable strain relief
Protects the cable from kinking and also provides complete waterproofing.
Robust mounting bracket
Holds the coil firmly on the stem.
Outer shell
Made of impact-resistant, UV-resistant plastic.
Coil cover
Protects the search coil from damage and chipping.
Wear-resistant coating
Made of composite materials, so the coil can safely be used without a cover if required.
Rubber rings
For a firmer fit of the coil on the lower stem.
Connector
Gold- or silver-plated contacts.
High-strength cable
With a larger conductor cross-section. Made in Germany.
Protective cap
Protects the connector from dirt and dust.
Fixing bolt and hook-and-loop strap
Supplied with the coil.